Monday, 14 October 2013

How To Revitalize The Appearance of Old Bathroom Tiles

Tiles offer a highly stylish and equally effective source of flooring and shower/tub wall siding in bathrooms. Whether it's ceramic, vinyl or porcelain, you can't go wrong with tiles. However, one of the most common complaints homeowners have regarding bathroom tiles is their susceptibility to dirt, grime and mildew. Those otherwise sparkling clean tiles will likely begin to develop a grimy look after several months. The good news is that you can revitalize their appearance in just a few simple steps.

Some homeowners feel the need to replace their bathroom tiles at the first sign of dirt and grime. While this one solution to the problem, replacing your tires is both expensive and time-consuming. Unless they are actually damaged, you should avoid replacing them. Instead, focus your efforts on cleaning them up. With the right approach, homeowners can clean up even the dirtiest and grimiest bathroom tiles.

Cleaning Bathroom Tiles


There are several different ways to clean bathroom tiles, one of which is with diluted bleach. You can pick up a jug of beach for about a $1 buck, making this a cost-friendly approach to your problem. I recommend filling up a spray bottle with 3 parts water and 1 part bleach. Make sure there's ample ventilation in your bathroom before spraying down the tiles. Let the diluted bleach sit for 15-20 minutes before scrubbing and rinsing it off. Bleach should make easy work of your dirty tile problem, leaving behind a fresh, new-looking appearance.

Another option available for cleaning bathroom tile involves the use of vinegar. There are dozens of uses for vinegar, and cleaning bathroom tiles is one of them. Simply spray your dirty tiles down with vinegar and scrub them using a basic cleaning brush. Don't worry about the strong odor vinegar creates, as it goes away once the solution has dried.

Other Bathroom Tile Revitalization Tips


When you're cleaning bathroom tile, pay close attention to the grout (small area between the tile). This is where the majority of mildew and soap scum thrive, so you'll want to spend additional time cleaning this area. If a large scrub brush isn't working, use a toothbrush to get down in between the grout. It takes a little more time to clean tile with a toothbrush, but it's well worth it in the end.

Proper ventilation is critical to preventing the growth of mildew and soap scum in the future. Ideally, homeowners should run the exhaust fan for half an hour after taking a shower or bath. This will suck out the moisture from the air, which in turn reduces the chance of mildew.

No comments:

Post a Comment